Configuring Network Management; Configuring Snmp; Editing Snmpv3 Users - Cisco RV120W Administration Manual

Administering Your Cisco RV120W

Configuring Network Management

STEP 3
STEP 4
Configuring Network Management
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco RV120W Administration Guide
In the Guest Inactivity Timeout field, enter the number, in minutes, before a guest
login session times out due to inactivity.
Click Save.
The Cisco RV120W supports Simple Network Management (SNMP) to allow you
to monitor and manage your router from an SNMP manager. SNMP provides a
remote means to monitor and control network devices, and to manage
configurations, statistics collection, performance, and security.

Configuring SNMP

To configure SNMP:
Choose Administration > Network Management.
Under SNMP, check Enable.
Click Save.

Editing SNMPv3 Users

SNMPv3 parameters can be configured for the two default Cisco RV120W user
accounts (Admin and Guest). To configure:
In the SNMPv3 User Table, check the box for the user to edit and click Edit.
Under Security Level, choose the amount of SNMPv3 Privileges:
• NoAuthNoPriv—Doesn't require any Authentication and Privacy.
• AuthNoPriv—Submit only Authentication algorithm and password.
• AuthPriv—Submit Authentication/privacy algorithm and password.
If you chose AuthNoPriv or AuthPriv, choose the type of authentication algorithm
(MD5 or SHA) and enter the authentication password.
7
121