Terms - Mitsubishi Electric CC-Link-AnyWire Bitty Bridge User Manual

Unless otherwise specified, this manual uses the following terms.
Term
AnyWire Bitty
Buffer memory
GX Developer
GX Works2
Intelligent function module
Master module
NZ2AW1C1BY
Programming tool
Remote I/O module
RWr
RWw
RX
RY
Slave module
Terminating unit
Transmission cycle time
10

TERMS

This system provides a high-speed and highly-reliable sensor network. An original transmission
system provided by Anywire Corporation. This module supplies power using a transmission line,
minimizing wiring for machines and equipment.
A memory in an intelligent function module, where data (such as setting values and monitoring values)
exchanged with a CPU module are stored
The product name of the software package for the MELSEC programmable controllers
A Q-series module other than CPU modules, power supply modules, and I/O modules, which is
mounted on a base unit
A module that controls a data link system.
One master module is required for one system.
The abbreviation for the CC-Link-AnyWire Bitty bridge module, NZ2AW1C1BY
A generic term for GX Works2 and GX Developer
A remote module that exchanges I/O signals (bit data) with an external device
Remote register (read area for CC-Link).
Information input in 16-bit units from the slave station to the master station.
Remote register (write area for CC-Link).
Information output in 16-bit units from the master station to the slave station.
Remote input (for CC-Link).
Information input in bit units from the slave station to the master station.
Remote output (for CC-Link).
Information output in bit units from the master station to the slave station.
A generic term for modules that communicate data with a bridge module
A waveform shaper
A data sampling interval
Description