Applicable System; Applicable Master Module; Differences In Parameter Settings Depending On The Cc-Link Versions - Mitsubishi Electric CC-Link-AnyWire Bitty Bridge User Manual

2.3

Applicable System

2.3.1

Applicable master module

Master modules that can be used are listed on the website of CC-Link Partner Association (CLPA).
For the website of CC-Link Partner Association (CLPA), refer to the following.
www.cc-link.org
2.3.2
Differences in parameter settings depending on the CC-Link
versions
The NZ2AW1C1BY is a remote device station supporting CC-Link Ver1.10.
For the setting of "Mode" and "Station Information (Station Type)" of a Mitsubishi master module to which the
NZ2AW1C1BY is connected, use any of the following combinations.
(1) Parameter settings of the master module for CC-Link Ver1.10 and earlier
versions
Master module
QJ61BT11
AJ61BT11, AJ61QBT11, A1SJ61BT11,
A1SJ61QBT11
FX2N-16CCL-M
*1 For the mode setting, refer to the user's manual of the master station used.
(2) Parameter settings of the master module for CC-Link Ver2.00
Master module
QJ61BT11N, L26CPU-BT, L26CPU-PBT, LJ61BT11,
RJ61BT11, Q80BD-J61BT11N, Q81BD-J61BT11
FX3U-16CCL-M
*1 For the mode setting, refer to the user's manual of the master station used.
*2 When there is a station number used as "Ver.2 Remote Device Station" in the existing system, specify the station
number of additional "Ver.1 Remote Device Station" before specifying that of "Ver.2 Remote Device Station".
20
Parameter setting item
*1
Mode setting
Remote Net(Ver.1 Mode)
Online (remote net mode)
Online
Parameter setting item
*1
Mode setting
Remote Net(Ver.1 Mode)
Remote Net(Ver.2 Mode)
Remote Net(Additional Mode)
Remote Net(Ver.1 Mode)
Remote Net(Ver.2 Mode)
Remote Net(Additional Mode)
Station Information (Station Type)
Remote Device Station
Station Information (Station Type)
Remote Device Station
Ver.1 Remote Device Station
*2
Ver.1 Remote Device Station
Ver.1-compatible remote device station
*2