4.2
AnyWire Bitty Side Terminal Block
The AnyWire Bitty side terminal block is the eight-point screw terminal block.
Screw terminal: M3 4.5
Tightening torque: 0.5 to 0.8Nm
4.2.1
Description of the terminals of an AnyWire Bitty side terminal
block
Terminal
DP
AnyWire Bitty transmission signal terminals
DP: Transmission cable (+), DN: Transmission cable (–)
DN
Connect the DP and DN terminals to those on the slave module and terminating unit.
24V
Power supply for the NZ2AW1C1BY
Connect these terminals to a 24VDC external power supply.
0V
Connect the LG terminal to the neutral point of the noise filter inserted between the 24V and 0V terminals.
LG
Ground the LG terminal at a single point along with the FG terminal.
AnyWire Bitty side
terminal block
Description
CHAPTER 4 CONNECTIONS
29
4