E-Stop And Key Switch; Keypads; Fig. 6-2: E-Stop And Key Switch; Fig. 6-3: Keypads - Bosch Rexroth VAM 10.1 Project Planning Manual

2
Module Layout

E-STOP and Key Switch

Keypads

Fig. 6-2: E-STOP and key switch
This module slot is equipped with a non-wired standard E-STOP
pushbutton. The two NC contacts of the switching elements can be wired
with the E-STOP circuits of the machine as required.
Additionally, the module slot is provided with a 4-stage key switch with
slide-in strips for individual labeling. The key switch has force-guided and
electrically isolated contacts. The key is removable if it is situated on the
left side (position 1).
Position
1
2
3
4
Fig. 6-3: Keypads
VAM 10.1 / VAM 40.1
NOT_AUS_und_Schlüsselschalter.FH9
Contacts closed
1-2
5-6
7-8
3-4
Tastenfelder.FH9
DOK-SUPPL*-VAM*10/40**-PR02-EN-P