Setting The Computer For Netware; Connecting To A Netware ® Network; Installing The Printer Driver; Setting The Printer Port - Canon N2000 Network Manual

Setting the Computer for NetWare

Perform these settings for each computer after you have selected the
NetWare
Connecting to a NetWare
Install the NetWare
printing then log onto the NetWare
to connect, refer to your NetWare

Installing the Printer Driver

NetSpot is a software application used to set the printer and the network. The
printer driver is required for printing. Install the printer driver. (
Guide)
When you install the printer driver, be sure to select Network Printer and
select the print queue that you created with the NetWare
settings.

Setting the Printer Port

On the desktop, click the Start button, point to Settings, then click Printers.
Click the printer icon, then from the File menu select Properties. Click the
Details or Port tab, then for the destination port select the print queue that
you created with the NetWare
Note
This procedure is not required if you selected the port connection during the printer
driver installation.
®
print service and protocol.
®
Network
®
Client software on every computer to be used for
®
print service settings. (
®
®
server or tree. For details about the how
®
or operating system instructions.
®
Setting the Computer for NetWare
Setup
print service
P.3-6)
3-21
®