Canon N2000 Network Manual page 81

5
For the Print Application select the print service to set. The displayed
screen changes.
Perform the following settings requested by the displayed screen.
BINDERY PSERVER Selected: Queue Server Mode (Using the Print
Server in Bindery Mode)
For NetWare
In the Print Server Name list, click the name of the print server
created in "Setting Up a NetWare
If the created queue name is not displayed in the Queue box,
click the Edit Queue button and create a queue.
In the Polling Interval text box, enter the polling interval. Enter
the number of seconds between intervals for the printer to wait
before polling the print queue.
NDS PSERVER: Queue Server Mode (Using the NDS Print Server)
In the NDS Tree and Context Name text boxes, enter the tree
name and context name of the print server. The context name
is limited to 255 characters.
For the Print Server Name, select the name of the print server
that you created in "Setting Up a NetWare
P.3-6)
In the Polling Interval text box, enter the polling interval. Enter
the number of seconds between intervals for the printer to wait
before polling the print queue.
RPRINTER: Remote Printer Mode (Using the Print Server in Bindery
Mode)
For "NetWare
used.
For the Print Server Name, select the print server name of the
print server that you created in "Setting Up a NetWare
Service" (
Click the Option button, then for the Printer Number enter the
same number for the printer that you entered in "Setting Up a
®
NetWare
Click the OK button.
®
Server select the name of the server to be used.
®
Server", select the name of the server to be
P.3-6).
Print Service" ( P.3-6)
®
Print Service" ( P.3-6)
®
Print Service" (
®
®
Setting NetWare Printer Protocol
Print
3-19