Setting Tcp/Ip Protocol With A Web Browser (Remote Ui) - Canon N2000 Network Manual

Setting TCP/IP Protocol with a Web Browser (Remote UI)

Important
2-14
TCP/IP Network Settings (Windows)
1
Start the Web Browser, enter the following URL for the Address, then
press the Enter key.
http://<Printer IP address or name>/
Example: http://172.20.88.196/
For the Web Browser, use Netscape Navigator/Communicator 4.04 or later, or use
Internet Explorer 4.01SP1 or later.
If you are using TurboLinux 4.0, you cannot use Netscape Communicator 4.08 to
set this printer. Use another version of a Web Browser.
A connection through a Proxy Server cannot be used. If you are using a network
environment with a Proxy Server, use the "Proxies" server setting in the Web
Browser to add the printer IP address to the "Exceptions" text box (the address not
used by the Proxy Server). (Performing this setting may differ, depending on the
network environment.)
Use the Web Browser to enable JavaScript and Cookie so these features can be
used.
If more than one remote UI is being used, then the most recently used settings
remain enabled. Starting and using only one Remote UI at a time is recommended.