Setting Up From A Client Computer; Access Configure; Start Configure From Webtools - Canon imagePRESS Server В5000 Configuration And Setup

Setting up from a client computer

After you start the imagePRESS Server for the first time, or install system software, you must set up the imagePRESS
Server. If you do not, default settings are used. Make sure that settings are appropriate for your printing
environment. If your network or printing environment changes, you may need to adjust your settings.
You can set up the imagePRESS Server from a client computer using Configure.
You can access Configure from the following locations:
•
WebTools (with a supported Internet browser)
•
Command WorkStation

Access Configure

Use Configure to specify imagePRESS Server settings.
For more information about Configure, see Command WorkStation Help.

Start Configure from WebTools

You must log in as Administrator to access Configure from WebTools.
1 Open an Internet browser and type the IP address of the imagePRESS Server.
2 In WebTools, on the Configure tab, click Launch Configure.
Note: If a message about an untrusted connection appears or you are asked whether you want to proceed, you
can safely ignore the message and proceed anyway.
3 Log on with Administrator privileges.
Stop untrusted connection messages from appearing
The following is an example using a Windows 7 computer with Internet Explorer 11. Actual steps may vary
depending on the operating system of the computer and Internet browser used.
1 In Configure, click Security > Server Certificate. Click the Create Self Signed Certificate button.
Configuration and Setup
Setting up from a client computer
80