Table of Contents
Advertisement
List of Network Settings
If you are using NetSpot, a Web Browser (Remote UI), or FTP Client, you
can use these applications to change settings of the network interface board.
The settings that can be changed are listed in the tables below.
Note
In the tables below, the information enclosed with parentheses denote items for
FTP Client. For example:
The asterisk (*) affixed to the item name means that this item cannot be set with
NetSpot, but you can use the Web Browser (Remote UI) or FTP Client to set this
item.
General Settings
Device Name
(DEVICE_NAME)
Location (SYS_LOC)
Administrator
(SYS_CONTACT)
Phone
(SYS_TEL_NUMBER)
Comment (E-mail)
(SYS_COMMENT)
Password
(ROOT_PWD)
User Permission
(USER_JOB_CONT)*
E-Mail Retry
(EMAIL_RETRY)*
Retry Interval
(EMAIL_DELAY)*
To: Address
(EMAIL_ADDR)*
• Device name (DEVICE_NAME):
"Device name" denotes the item for NetSpot and the Web Browser, and
"DEVICE_NAME" denotes the item in the Config file for FTP Client.
Item
Device name (Range: 0 to 32 chars.)
Device location (Range: 0 to 32 chars.)
Name of Administrator for the device (Range: 0
to 32 chars.)
Telephone number of the Administrator (Range:
0 to 32 chars.)
Administrator Comments (Range: 0 to 32 chars.)
Device password (Range: 0 to 15 chars.)
Determines whether a user has permission to
execute print jobs.
The maximum number of retries attempted after
failure of an e-mail transmission.
The time interval between retries after failure of
an e-mail transmission.
The addresses where e-mail notifications are sent
(Address length: 0 to 128 chars.)
Maximum number of addresses: 2
Description
List of Network Settings
Initial Value
Blank
Blank
Blank
Blank
Blank
Blank
Off
0
5
Blank
6-3
Advertisement
Table of Contents
