Initializing Network Settings - Canon N2000 Network Manual

Initializing Network Settings

Note
1
2
3
4
6-2
Other Important Information
Follow the procedure below to the printer operation panel to restore all the
network settings to the default values set before shipping the printer from the
factory.
You can use the printer operation panel to restore the network default settings or
you can use one these software applications:
• NetSpot:
For details about the procedure to reset the network defaults, refer to NetSpot
online Help.
• Web Browser (Remote UI):
For details, refer to the Web Browser online Help.
• FTP Client:
For details see "Managing the Printer with an FTP Client" (
On the printer operation panel, press the Online key. The Online lamp
goes off.
Press the Setup button.
Press or to select the items below then press
Set Interface Ext. Network
When you see "Execute?" displayed, press
Init. Settings
Initializing
Init. Settings
Initialized!
Init. Settings
.
P.2-38)
.