Windows Nt 4.0 Lpd Connection - Canon N2000 Network Manual

Windows NT 4.0 LPD Connection

Note
2-28
TCP/IP Network Settings (Windows)
3
Check the Port Name selection and confirm that IP_xxx.xxx.xxx.xxxx
is selected, for the Printer Name enter the name of the printer, then
click the Next button.
4
Follow the instructions on screen.
The printer driver and NetSpot Suite Service installation begins. The printer
driver and printer port installation are completed after the system has
finished restarting.
1
Confirm that "Microsoft TCP/IP Printing" is installed.
On the desktop, click the Start button, point to Settings, then
click Control Panel.
Double-click the Network icon.
Click the Services tab.
If "Microsoft TCP/IP Printing" is not displayed in the Network Services list, go to
Step 2. If it is in the list, go to Step 3.