Setting The Computer For Netware - Canon imagePROGRAF W6400 User Manual

NetWare Settings (Windows)

Setting the Computer for NetWare

Perform these settings for each computer after you have
selected the NetWare print service and protocol.
Connecting to a NetWare Network
Install NetWare client software on all the computers that
will be used to print, then log in to the NetWare server or
tree. For more details about connection methods, refer to
the NetWare or operating system instructions.
Installing the Printer Driver
The printer driver is required for printing. Install the
printer driver under the direction of the network system
administrator.
When you install the printer driver, be sure to select Net-
work Printer and select the print queue that you created
with the NetWare print service settings.
Setting the Printer Port
Press the Start button then select Settings > Printers >
Printer icon > File > Properties. Display either the
Details or Port sheet and specify the print queue you
created with the NetWare print service settings as the
setting for the print destination. (
Note
This procedure is not required if you set the connection
destination for the printer during the installation of the
printer driver.
5- 44
→
P.5-37)
TOP
Chapter 1
Basic Procedures
Chapter 2
Using a Variety of
Media
Chapter 3
Printing Methods for
Different Objectives
Chapter 4
Maintaining the
Printer
Chapter 5
Using the Printer in a
Network Environ-
ment
Chapter 6
Troubleshooting
Chapter 7
Operation of the
Function Menus
Contents
Index