Nortel 1001t Installation Manual page 90

2-36
Connecting the
ELAN cable to the
M1 switch
Standard 1.0
To connect the ELAN cable to the M1 switch, follow these
steps.
Step Action
1 Connect the end of the core 0 ELAN hub cable to the
transceiver RJ45 jack from core 0.
2 Connect the end of the core 1 ELAN hub cable to the
transceiver RJ45 jack from core 1.
Note: The Option 11 M1 switch uses only a single transceiver
cable connection.
Nortel Symposium Call Center Server
1001t Hardware Installation Guide
Installing hardware
Connecting the M1 switch
May 1998