Table of Contents
Advertisement
Getting started
Preparing cables
Preparing cables
Standard 1.0
To make the cables, follow these steps.
Step
Action
1
Cut appropriate lengths of cable according to the cable length
chart.
2
Terminate each end with an RJ45 connector. Use BNC
connectors if a coaxial cable is required for the CLAN.
3
Fill out and attach a cable identification tag to each
completed cable, indicating from and to destinations.
4
Set cables aside for later installation.
Nortel Symposium Call Center Server
1001t Hardware Installation Guide
1-31
May 1998
Advertisement
Table of Contents
