Changing The Options For The Scan Buttons On The Toolbar - Canon MultiPASS C530 Software Manual

Changing the Options for the Scan Buttons on the Toolbar

In the Toolbar settings, you can define certain features associated with the scan buttons on the
Toolbar. These features include scan settings that the Toolbar uses automatically to produce the
scanned image. These settings are defined independently for each scan destination available, such
as scan to fax or scan to mail. Although these settings are predefined so you can begin scanning
with the Toolbar immediately after installing the MultiPASS software, you can change these
settings as needed.
To change the scan button options:
1. On the Windows Desktop, right-click on the MultiPASS Toolbar icon, and then click Toolbar
Settings.
Chapter 1 Introduction 1-14