Moving An Image; Reversing The Image Tone - Canon MultiPASS C530 Software Manual

4. To further define the dimensions of the selected area, in the Width and Height text boxes,
type the appropriate values. The image selection borders change to match the specified
width and height.
5. If you want to select an entirely different area of the image, click outside the crop lines to
clear the current selection.
6. To preview the newly selected image area, click Preview.

Moving an Image

If the image is too large to see in its entirety, you can move the image within the preview area to
locate a relevant section.
To move an enlarged image:
On the toolbar, click Move Image and drag the zoomed image to display the appropriate area or
detail.

Reversing the Image Tone

You can create a negative of an image for stylistic effect. A negative image is created by inverting
the dark and light areas.
To reverse the tone of an image:
On the toolbar, click Negative/Positive.
Chapter 4 Scanning
4-25