Using The Multipass Toolbar - Canon MultiPASS C530 Software Manual

Using the MultiPASS Toolbar

The MultiPASS Toolbar displays as an icon on the Windows desktop. When you click the icon
(or press Start/Scan on the MultiPASS), the MultiPASS Toolbar (hereafter referred to as the
Toolbar) displays on the Windows desktop and enables you to scan a document or image,
without opening a graphics application or the Desktop Manager.
When you scan a document, the system uses defined settings that determine the characteristics
of your scanned image (such as the image type and resolution). The settings are predefined,
enabling you to begin scanning with the Toolbar immediately. However, you can change these
settings as needed.
The following illustration includes each of the buttons that may display on the Toolbar. The
button icons may vary somewhat based on your Toolbar settings. You can also adjust the
Toolbar settings to display only those buttons that are convenient for you.
Chapter 1
Fax Scan Text
Mail
Scan Photo
Custom Toolbar Settings
Desktop Manager Help
Introduction 1-10