Scanning From a Windows Application
You can use the MultiPASS to scan documents directly into a Windows application that
supports a TWAIN interface (such as Photoshop). Some applications allow multiple page scans,
while others do not. If you are unsure whether your Windows application supports this feature,
refer to the user documentation for the application you are using.
The following instructions summarize the general procedures for scanning an image. For
specific information on scanning with your Windows application and specifying MultiPASS as
the scan device, refer to the user documentation for the application you are using.
To scan an image from a Windows application:
1. Place the image you want to scan face down in the Automatic Document Feeder (ADF) of
the MultiPASS.
2. In your Windows application, select the command to scan a document.
In some applications, the appropriate command may be listed as Acquire or Acquire
Image.
3. In the ScanGear window, specify the following preview scan options for your document as
necessary: Scan Mode, Scan Resolution, Preferences, Page Size, and Black and White
Options (if applicable).
4. Click Preview.
Chapter 4
Scanning
4-8