Sending Faxes; Preparing To Fax A Document - Canon MultiPASS C20 User Manual

Sending Faxes

This section describes how to send faxes with the MultiPASS C20.

Preparing to Fax a Document

To send a fax, you first need to load the document into the Automatic
Document Feeder (ADF) and adjust the resolution as follows:
1. Prepare the document and load it into the Automatic Document
Feeder (ADF) as described in "Loading the Document" on
page 4-5.
2. If you want to change the resolution, press RESOLUTION to
RESOLUTION
display the resolution you want.
The MultiPASS C20 is now ready to send the fax.
3-6
Sending and Receiving Faxes
Once the document is loaded, the display shows how much of
the unit's memory is in use, then displays the current
resolution, and finally the message DOCUMENT READY.
MEMORY USED
STANDARD
DOCUMENT READY
PHOTO
STANDARD
FINE
(Currently used image memory)
0%
(Current resolution)
(Standby to scan)
(FINE resolution with halftone)
Chapter 3