Safety Instructions - Canon MultiPASS C20 User Manual

Safety Instructions

Read these safety instructions thoroughly before using your MultiPASS
C20, and keep them handy in case you need to refer to them later.
C
Except as specifically described in this manual, do not attempt to service
the MultiPASS C20 yourself. Never attempt to disassemble the unit:
opening and removing its interior covers will expose you to dangerous
voltages and other risks. For all service, contact your local authorised
Canon dealer or service centre.
Always follow all warnings and instructions marked on the
MultiPASS C20.
Use the MultiPASS C20 only on a sturdy, stable, level surface. If the
MultiPASS C20 falls, it could be seriously damaged.
Do not use the MultiPASS C20 near water. If you spill liquid on or
into the unit, unplug it immediately and call your local authorised
Canon dealer or service centre.
The back and bottom of the MultiPASS C20 include slots and
openings for ventilation. To keep the MultiPASS C20 from
overheating (which can cause it to operate abnormally and create a
fire risk), take care not to block or cover these openings. Do not
operate the unit on a bed, sofa, rug, or other similar soft surface, or
near a radiator or other heat source. Do not place the MultiPASS C20
in a cupboard or cabinet or on shelves unless adequate ventilation is
available. See "Choosing a Location for Your MultiPASS C20" on
page 2-3 for guidelines on how much space the unit needs for
ventilation.
Operate the MultiPASS C20 only from the type of power source
indicated on the unit's label. If you are not sure of the type of power
available from your wall outlets, contact your local power company.
Make sure the total amperage used by all devices plugged into the
wall outlet does not exceed the ampere rating of the outlet's circuit
breaker.
Do not allow anything to rest on the power cord or place the
MultiPASS C20 where the cord will be walked on. Make sure the
cord is not knotted or kinked.
Chapter 1 Introducing the MultiPASS C20
1-11