Table of Contents
Advertisement
Installing the Software
When you install the printer driver and Desktop Manager, you are also
installing the fax and scan drivers; the Desktop Manager Background; and
the Desktop Manager utility programs.
The Desktop Manager software is installed in the C:\MPASS drive and
directory on your local hard disk, unless you specify another drive and/or
directory during the installation process. The installation process changes
some of your system files.
During the installation, you are prompted to enter certain fax setup
information. This information can later be changed in the Desktop
Manager, as described in a later chapter.
n
The fax setup information you enter during the installation adjusts
corresponding settings in your C20. Therefore, any fax information you
may have set manually in the C20 is replaced by the information you enter
when installing the Desktop Manager.
During installation, the MultiPASS Background is automatically added to
your Windows StartUp group. This setup enables your system to
automatically start the MultiPASS Background each time you start
Windows.
Preparing for the Installation
Before you actually begin the installation, take some time to prepare the
system, software diskettes, and fax setup information for the process.
Connect the C20 to the parallel port on your computer.
The selected parallel port must be a dedicated port. The C20 does not
operate with a redirected or virtual parallel port.
2-2 Installing the Desktop Manager Software
Chapter 2
Advertisement
Table of Contents
