Table of Contents
Advertisement
When you start the Desktop Manager again at a later time, the MultiPASS
Background is automatically reopened if your C20 has been reconnected to
the port. You can also open the MultiPASS Background without opening
the Desktop Manager.
Preparing to Close the MultiPASS Background
If you are closing the MultiPASS Background, you may want to set the C20
to print any received faxes. With the MultiPASS Background closed,
received faxes cannot be moved to the Desktop Manager. Received faxes
can also be stored in the C20 memory. However, if the memory becomes
full, the C20 is unable to receive more faxes until you print the faxes stored
in memory.
To set the C20 to print received faxes:
In the Desktop Manager, open the Setup Options dialog box. In the Setup
Options dialog box, on the Receive Fax tab, select Print Fax in the If
Computer On and If Computer Off boxes. Save your changes.
For detailed instructions on changing C20 setup options, refer to the
"Setting Up C20 Options in the Desktop Manager" section in this chapter.
Closing the MultiPASS Background (Windows 3.1x)
Follow these instructions to close the MultiPASS Background in Windows
3.1x.
1. Close the MultiPASS Desktop Manager.
2. On the Windows desktop, click the left mouse button on the minimized
MultiPASS Background icon. In the displayed menu, click Close.
Do not delete the MultiPASS Background icon from the MultiPASS
Utilities group.
8-24 C20 Setup and Other Utilities in the Desktop Manager
Chapter 8
Advertisement
Table of Contents
