Table of Contents
Advertisement
Closing the MultiPASS Background (Windows 95)
Follow these instructions to close the MultiPASS Background in Windows
95.
1. Close the MultiPASS Desktop Manager.
2. On the Windows taskbar, click the right mouse button on the
MultiPASS Background button. In the displayed menu, click Close.
Removing MultiPASS Background from StartUp
Closing the MultiPASS Background does not remove it from the Windows
StartUp group. If you have disconnected your C20, the next time you start
Windows, the MultiPASS Background will try to open. At that time, the
MultiPASS Background will be unable to detect the device, displaying an
error message.
Click OK to close the message dialog box. The MultiPASS Background
closes automatically, since it cannot detect the C20 device. Your port
remains available for you to use with other devices.
However, if you would like to prevent the message from displaying each
time you start Windows, you can remove the MultiPASS Background from
the StartUp group.
The following instructions summarize the procedures for removing a
program from Windows StartUp. For more details, refer to your Windows
user documentation.
Chapter 8
C20 Setup and Other Utilities in the Desktop Manager 8-25
Advertisement
Table of Contents
