Memory And Storage Functions - Calculated Industries 4065 User Manual

Ç –
Ç +
Ç •
Ç 0
Ç ß

Memory and Storage Functions

µ
ß 1 – 3
2 — C
ONSTRUCTION
Change Sign (+/–) — Toggles the sign of the dis-
played value to positive or negative.
Pi ( π ) — Constant = 3.141593
Degrees:Minutes:Seconds (dms
Converts between D:M:S and decimal degree formats.
Total Cost (Cost) — Calculates total material cost
given a unit dimension and an entered Per Unit Cost.
Access Preference Settings (Prefs) — Used to
access various customizable settings, such as
dimensional answer formats (see Preference
Settings on page 83).
Cumulative Memory — Whenever the µ key is
pressed, the displayed value will be added to the
Memory. Other memory functions:
FUNCTION
Add to Memory
Subtract from Memory
Recall total in Memory
Display/Clear Memory
Clear Memory
Memory is semi-permanent, clearing only when you:
1) turn off the calculator;
2) press ® ®;
3) press Ç ®;
4) press Ç x (Clear All) .
When memory is recalled (® µ), consecutive
presses of µ will display the calculated average
and total count of the accumulated values.
Storage Registers (M1) through (M3) — Stores
the displayed value in non-cumulative, permanent
Memory (e.g., 1 0 ß 1). Good for storing a
single value, for future reference (® 1 = 10).
Note: Non-cumulative means it only accepts one value (does not
add or subtract) and a second entered value will replace the first.
Permanent means the value is stored even after the calculator is
shut off. To delete a stored value, enter a new value or perform a
Clear All ( Ç x) .
M ® P
ASTER RO
/ T / D
RIG ESKTOP
deg) —
KEYSTROKES
µ
Ç µ
® µ
® ®
Ç ®