Examples - Using The Construction Master Pro; Linear Measurement Examples; Adding Linear Measurements; Cutting Boards - Calculated Industries 4065 User Manual

EXAMPLES — USING THE CONSTRUCTION
MASTER PRO
The Construction Master Pro calculators have keys and functions
labeled in common building terms. Just follow the examples and
adapt the keystrokes to your specific application.
Please note that some of the following examples will not apply to
your specific calculator model. For example, the Trig Model (#4080)
has trigonometry functions, but does not have l, W or h
keys, or Blocks , Footing or Drywall functions.
It is good practice to clear your calculator (press o twice) before
beginning each problem. And remember to use the Backspace B
key to correct entries one entry at a time.

LINEAR MEASUREMENT EXAMPLES

Adding Linear Measurements

Find the total length of the following measurements: 5 Feet 4-1/2
Inches, 8 Inches and 3.5 Yards.
KEYSTROKE
1. Add the measurements:
o o
5 f 4 i 1 / 2 +
8 i +
3 • 5 y
2. Find the total:
=

Cutting Boards

How many 2-foot 2-inch pieces can be cut from one 10-foot board?
KEYSTROKE
Divide board length by smaller cuts:
o o
1 0 f
÷ 2 f 2 i =
DISPLAY
5 4-1/2
FEET
6 0-1/2
FEET
3.5
16 6-1/2
FEET
DISPLAY
10
FEET
4.615385
(4 whole pieces)
U ' G — 29
SER S UIDE
0.
INCH
INCH
YD
INCH
0.