Table of Contents
Advertisement
Ç √
Ç /
Ç ÷
Ç –
π
Ç π
Ç •
Ç =
MEMORY and STORAGE FUNCTIONS
Your calculator has two types of Memory:
1) basic Memory or Semi-Permanent, Cumulative µ;
2) non-cumulative Storage Registers (M1-M3).
µ
Cube Root Function — Used to find the Cube Root
of a non-dimensional or volume value
(e.g., 1 0 0 0 Ç √ = 10).
— Allows entry of an exponent. For example,
x10
y
8 Ç / 1 4 is 8 times 10 to the 14th power
(8x10
).
14
1/x — Finds the reciprocal of a number (e.g., 8
Ç ÷ = 0.125).
Change (+ / –) Sign — Changes the sign of the dis-
played value to negative or positive.
Pi — Constant = 3.141593
ArcK — Constant = 0.017453. This value is equiva-
lent to the constant of a 1° arc angle for a one-unit
value. The formula for this constant is π ÷ 180.
Degrees:Minutes:Seconds — Converts between
D:M:S and Decimal Degree formats.
Note: Your calculator uses a floating d:m:s format (that is, dis-
plays decimal degrees to the maximum number of decimal points,
for greater accuracy). If you desire rounding to two decimal points
(0.00°), you must set your calculator via Preference Settings (see
page 107).
Access Preference Settings — Used to access
various customizable settings, such as dimensional
answer formats (see Preference Settings on page
107).
Semi-Permanent Memory — Adds any displayed
number, dimensioned or unitless, to the semi-per-
manent, accumulating Memory. Values can be sub-
tracted from this Memory using Ç µ. ® ®
will recall and clear the Memory. Ç ® will swap
the value stored in accumulative Memory with the
value that is currently displayed.
U
'
G
— 7
SER
S
UIDE
Advertisement
Table of Contents
