Memory And Storage Functions - Calculated Industries 44080 Construction Master Pro Desktop v3.0 User Manual

Ç ÷
Ç –
Ç +
Ç •
Ç 0
Ç ß

Memory and Storage Functions

Your calculator has two types of Memory:
1) basic memory or semi-permanent, cumulative µ;
2) non-cumulative Storage Registers (M1-M3).
µ
ß 1 – 3
1/x — Finds the reciprocal of a number (e.g., 8
Ç ÷ = 0.125).
Change Sign (+/–) — Toggles the sign of the dis-
played value to positive or negative.
Pi ( π ) — Constant = 3.141593
Degrees:Minutes:Seconds — Converts between
D:M:S and decimal degree formats.
Total Cost — Calculates total material cost given a
unit dimension and an entered Per Unit Cost.
Access Preference Settings — Used to access
various customizable settings, such as dimensional
answer formats (see Preference Settings on page
89).
Semi-Permanent Memory — Adds any displayed
number, dimensioned or unitless, to the semi-per-
manent, cumulative Memory. Values can be sub-
tracted from this Memory using Ç µ (M–) . ®
µ will display the value in the Memory. ® ®
will display and clear the value in the Memory. Ç
® will clear the cumulative Memory without dis-
turbing the existing display.
Storage Registers (M1) through (M3) — Stores
the displayed value in non-cumulative, permanent
Memory (e.g., 1 0 ß 1). Good for storing a
single value, for future reference (® 1 = 10).
Note: Non-cumulative means it only accepts one value (does not
add or subtract) and a second entered value will replace the first.
Permanent means the value is stored even after the calculator is
shut off. To delete a stored value, enter a new value or perform a
Clear All Ç x .
U ' G — 9
SER S UIDE