Blocks/Bricks ( Not Available On Trig Model #4080); Number Of Blocks, Based On Entered Length And Height; Number Of Blocks, Based On Entered Area - Calculated Industries 4065 User Manual

BLOCKS/BRICKS (

Number of Blocks, Based on Entered Length and Height

You are building an "L" shaped retaining wall out of standard 8-inch x
16-inch size blocks (Note: this is the default block size of 128 Square
Inches) . One side of the retaining wall is 22 Feet long, and the other
side is 15 Feet 8 Inches long. The wall is to be 4 Feet high. How many
blocks are required to build this wall? Add a 5% waste allowance.
Note: The calculated area from an entered length (l) and height (h) will be
used for calculating blocks if these values exist.
KEYSTROKE
1. Find total wall length:
o o
® Ç 4* (Blk Size)
2 2 f + 1 5 f 8 i =
l
2. Enter wall height as height:
4 f h
3. Find the number of blocks and add 5% waste allowance:
Ç l (Blocks)
+ 5 %
*If ® Ç l (Blocks) does not result in 128 Square Inches,
then enter the following:
1 2 8 i i ß 4 (Blk Size)
-OR-
8 i x 1 6 i =
ß 4 (Blk Size)

Number of Blocks, Based on Entered Area

Find the number of blocks required for an area measuring 300
Square Feet. Then add a 3% waste allowance.
KEYSTROKE
o o
3 0 0 f f
Ç l (Blocks)
+ 3 %
NOT AVAILABLE ON TRIG MODEL
B--AR 128.
STORED
37
LNTH 37
HGHT 4
BLKS 169.5
(178 Blocks)
B--AR 128.
STORED
128.
B--AR 128.
STORED
300
BLKS 337.5
(348 Blocks)
U '
SER S
#4080)
DISPLAY
0.
SQ INCH
8
FEET INCH
8
FEET INCH
0
FEET INCH
177.975
SQ INCH
SQ INCH
SQ INCH
DISPLAY
0.
SQ FEET
347.625
G — 35
UIDE