Studs Function; Trigonometric Keys ( Trig #4080 And Desktop #44080 Models Only ) - Calculated Industries 4065 User Manual

Ç s

Studs Function

The Construction Master Pro also calculates the number of studs
required for a wall using an entered length and stored On-center
spacing value.
Ç 5
Trigonometric Keys (
16 — C
ONSTRUCTION
Riser Limited — Used for situations when the riser
height is limited by local code. When you press Ç
s, the calculator will recalculate stair values so
that the actual Riser Height will not exceed your
stored desired Riser Height (e.g., it will never
exceed the stored desired Riser Height of
7-1/2 Inches, if 7-1/2 Inches is the value stored
using ß 7). To compensate for this limitation, the
calculator will add one to the number of risers.
Studs — Calculates the number of studs for an
entered or displayed linear value. Based on the
stored On-center spacing (16 inches is the default).
#4080
TRIG
Tangent Ø =
Sine Ø =
Cosine Ø =
M ® P
ASTER
#44080
AND DESKTOP
Opposite
Adjacent
Opposite
Hypotenuse
Adjacent
Hypotenuse
/ T / D
RO RIG ESKTOP
)
MODELS ONLY