Area And Volume Keys ( Not Available On Trig Model #4080) - Calculated Industries 4065 User Manual

m
Ç 7
Ç 9
Ç 2
Ç 8
Area and Volume Keys (
l
W
h
4 — C
ONSTRUCTION
Meters — Enters or converts to Meters .
Centimeters (cm) — Enters or converts to
Centimeters .
Millimeters (mm) — Enters or converts to
Millimeters .
Acres (Acre) — Enters or converts (a square value)
to Acres .
Board Feet (Bd Ft) — Enters or converts cubic
values to Board Feet . One Board Foot is equal to
144 Cubic Inches.
NOT AVAILABLE ON TRIG MODEL
Length — Enters a length for calculation of area or
volume.
Width — A multi-function key used to enter a width
for calculation of area or volume (if a length and
height are also entered). Consecutive presses of
this key display or calculate:
Press Result
1 Displays Entered Width (WDTH)
2 Area (AREA)
3 Square-up (SQUP)
4 Perimeter (PER)
5 Redisplays Entered Length (LNTH)
6 Redisplays Entered Width (WDTH)
Height — A multi-function key used to enter a
height for calculation of volume (if a length and width
are also entered). Consecutive presses of this key
display or calculate:
Press Result
1 Displays Entered Height (HGHT)
2 Volume (VOL)
3 Wall Area (WALL)
4 Total Room Area (ROOM)
5 Redisplays Entered Length (LNTH)
6 Redisplays Entered Width (WDTH)
M ® P
ASTER RO
/ T / D
RIG ESKTOP
#4080)