Studs; Basic D:m:s And Trigonometry Examples; Converting Degrees:minutes:seconds; Time Calculations Using D:m:s - Calculated Industries 4065 User Manual

STUDS

Find the number of 16-inch On-center studs needed for a wall with a
length of 18 Feet 7-1/2 Inches.
KEYSTROKE
1. Enter length and convert to Studs*.
o o
1 8 f 7 i 1 / 2
Ç 5 (Studs)
*The length is divided by the On-center spacing; in this case, 16 Inches (default set-
ting). Press ® 5 to review the stored On-center value. If you need to enter a new
On-center, for example 18 Inches, enter 1 8 i ß 5 .

BASIC D:M:S AND TRIGONOMETRY EXAMPLES

Converting Degrees:Minutes:Seconds

Convert 23° 42' 39" to decimal degrees:
KEYSTROKE
o o
2 3 • 4 2 • 3 9
Ç • (dms
Convert 44.29° to degrees:minutes:seconds format:
KEYSTROKE
o o
4 4 • 2 9 Ç • (dms
Note: Improperly formatted entries will be redisplayed in the correct convention after
any operator key is pressed. For example, 30° 89' entered will be corrected and dis-
played at 31° 29' 0" or 31.48333°.

Time Calculations Using D:M:S

Add 7 Hours 45 Minutes 33 Seconds to 11 Hours 16 Minutes
20 Seconds:
KEYSTROKE
o o
7 • 4 5 • 3 3
+ 1 1 • 1 6 • 2 0 =
78 — C
ONSTRUCTION
deg)
deg)
M ® P
ASTER
/ T / D
RO RIG ESKTOP
DISPLAY
18 7-1/2
FEET INCH
STUD 15.
(studs)
DISPLAY
DMS 23.42.39
23.71°
DISPLAY
DMS 44.17.24
DISPLAY
DMS 7.45.33
DMS 19.01.53
0.
0.
0.
0.