Switching Points; Standard Program; Holidays; Heating Circuits - Siemens Albatros RVS46 Series User Manual

Switching points

Standard program

Operating mode

66/138
Siemens
Building Technologies
Line no.
HC1 HC2 3/HCP 4/DHW 5
500 520 540 560
501 521 541 561
502 522 542 562
503 523 543 563
504 524 544 564
505 525 545 565
506 526 546 566
Line no.
516, 536, 556, 576,
616
All time programs can be reset to their default settings. Each time program has its own
operating line to make this reset.
In that case, individual settings will be lost!

6.5 Holidays

Line no.
HC1 HC2 HCP
641 651 661
642 652 662
643 653 663
648 658 668
The holiday program is used to switch the heating circuits to a selectable operating
level according to calendar dates.
· The holiday program can only be used in "Automatic" mode

6.6 Heating circuits

For heating circuits, there are various functions available which can be individually set
for each heating circuit.
Line no.
1300
The operating mode of heating circuits 1 and 2 is selected directly with the operating
mode button while the operating mode of heating circuit P is to be selected in
programming mode (operating line 1300).
This setting is used to switch between the different operating modes. The functionality
corresponds to operating mode selection with the operating mode button. For details,
refer to section "Operation".
User Manual
Holidays
Operating line
600 Preselection
Mo - Su
Mo - Fr
Sa - Su
Mo - Su
601 1. phase on
602 1. phase off
603 2. phase on
604 2. phase off
605 3. phase on
606 3. phase off
Operating line
Default values
Operating line
Preselection
Start
End
Operating level
Frost protection
Reduced
Operating line
Operating mode
Protection mode
Automatically
Reduced
Comfort
CE1U2353en
2014-07-30