Radio; Binding; List Of Wireless Devices; Time Programs - Siemens Albatros RVS46 Series User Manual

Binding

Binding
Test mode

List of wireless devices

Delete all devices
Entering the switching
times
Siemens
Building Technologies

6.3 Radio

Line no. Operating line
120 Binding
121 Test mode
For more detailed information, refer to the descriptions of the wireless components in
section 3.8.
When commissioning the system, the wireless peripheral devices (room unit) are
assigned to the basic unit.
The test mode is used for checking the wireless communication. The test should be
made when the installation is fully completed.
Line no. Operating line
130 Room unit 1
Missing
Ready
No recept'n
Change batt
131 Room unit 2
Same as on operating line 130
132 Room unit P
Same as on operating line 130
133 OutsideSens
Same as on operating line 130
134 Repeater
Same as on operating line 130
135 Operator unit 1
Same as on operating line 130
136 Operator unit 2
Same as on operating line 130
137 Operator unit P
Same as on operating line 130
138 Service unit
Same as on operating line 130
140 Delete all devices
The wireless connection to all devices will be cancelled. If radio communication is
required again, a new binding must be established.

6.4 Time programs

For the heating circuits and DHW heating, a number of switching programs are
available. They are activated in "Automatic" operation and control the change of the
temperature levels (and the associated setpoints) via the selected switching times.
The switching times can be set in a combined way, that is, either commonly for several
days or in the form of separate times for individual days. When preselecting groups of
days like for instance Mo...Fr and Sa...Su that use the same switching times, setting of
the switching programs is simplified.
User Manual
Radio
65/138
CE1U2353en
2014-07-30