Setting Principle; Example: "Setting The Time Of Day"Error! No Bookmark Name Given - Siemens Albatros RVS46 Series User Manual

Setting principle

Example: "Setting the time of day"Fehler! Es wurde kein Textmarkenname vergeben.
56/138
Siemens
Building Technologies
3.1.2 Programming
Settings that cannot be made directly with the operating elements require
programming. For that, the respective setting buttons are used as follows:
+
· Press ESC to go one step back at a time, readjusted values are not be adopted
· If no setting is made for 8 minutes, the display returns automatically to the basic
display
· Operating lines may be hidden, depending on the type of controller, the configuration
made and the user level
The following example shows how to set the time of day and the date.
Operation Display example
1
2
+
3
+
User Manual
AVS37.390
+
OK
Description
Basic display.
If the basic display does not appear,
press the operating mode button.
Press OK.
The display shows the first operating
line, alternating with the value.
1
Press the arrow button until you
reach operating line "Hours /
minutes" (e.g. 50).
1
Press OK to confirm.
The display shows the hours
flashing.
1
Press the "+/-" button until the hours
of the time of day are correct.
Press OK to confirm.
CE1U2353en
2014-07-30