Mmc Interface (Micro Memory Card) - Siemens Simatic ET 200pro FC Operating Instructions Manual

3.1.3

MMC interface (Micro Memory Card)

Description
The MMC interface can be used to back up frequency converter parameters on an external
MMC and, if required, download them back onto the frequency converter.
Possible fields of application for the MMC
The MMC can be used as a parameter memory:
● Uploading a parameter set onto an MMC
● Transferring parameters from an MMC when exchanging the frequency converter
● Automatic download of a parameter set from an MMC.
Note
Several parameter sets can be stored on an MMC. The file name clone00.bin is used in
the default setting. Other names can be set via P0804 (e.g., clone00.bin to clone99.bin).
Inserting the MMC
ET 200pro FC
Operating Instructions, 07/2016, A5E01100763B AC
Precondition: The frequency converter must be disas-
sembled.
The label must be facing down when the chamfered edge
of the MMC is pointing left.
The MMC must be pushed into the MMC slot as far as it
will go; it can only then be removed by pressing the eject
button.
Interfaces
3.1 Communication interfaces
35