Table of Contents
Advertisement
3.3
Interface to the motor holding brake
Description
A motor holding brake can be controlled using the ET 200pro FC. The electrical connection
between the frequency converter and the brake is established by plugging the motor cable
into the frequency converter. Use of the motor holding brake is optional.
Table 3- 1
Number
1
2
3
4
5
6
7
8
ET 200pro FC
Operating Instructions, 07/2016, A5E01100763B AC
Assignment of wiring from the temperature sensor and motor holding brake in the motor
plug
Pin X2 on the frequency converter
HAN Q8/0 (socket)
U
Not assigned
W
Brake (-)
PTC/KTY84 (+)
Brake (+)
V
PTC/KTY84 (-)
PE
3.3 Interface to the motor holding brake
Interfaces
37
Advertisement
Table of Contents
