Inserting The Micro Sd Card/Nano Sim Card - Siemens Simatic IPC520A Operating Instructions Manual

5.2

Inserting the Micro SD card/Nano SIM card

Requirements
• The device is disconnected from the power supply.
• Micro SD card or Nano SIM card that is suitable for industrial use.
Installation
NOTICE
Inserting a memory card
If you are using the Micro SD card/Nano SIM card in a device installed in a system, you must
observe the safety regulations for work on electrical systems.
Carefully insert the Micro SD card/Nano SIM card into the card holder without applying
excess force.
SIMATIC IPC520A
Operating Instructions, 11/2021, A5E51366325-AA
5.2 Inserting the Micro SD card/Nano SIM card
Open the card cover on the bottom.
Push the Micro SD card/Nano SIM card correctly into the supporting
frame. The contacts of the Micro SD card/Nano SIM card must face
to the motherboard.
Push the card cover back.
Expanding the device
41