Chapter 31: Removing The Power-Adapter Port; Prerequisites; Procedure - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 5 in
5. Follow the procedure from step 1 to step 3 in
6. Remove the memory module.
7. Remove the wireless card.
8. Remove the I\O board.
9. Remove the heat sink.
10. Remove the system board.
Procedure
1. Remove the screw that secures the display hinge to the palm-rest assembly.
2. Open the display hinge to an angle of 90 degrees.
56 Removing the power-adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
"Removing the hard
drive".
cover".
drive".
31
After