Chapter 22: Replacing The I/O Board; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Slide the I/O-board cable into its connector on the I/O board and close the latch to secure the cable.
2. Adhere the tape that secures the I/O-board cable to the I/O board.
3. Turn the I/O board over and align the screw hole on the I/O board with the screw hole on the palm-rest assembly.
4. Replace the screw that secures the I/O board to the palm-rest assembly.
Post-requisites
1. Follow the procedure from step 3 to step 7 in
2. Replace the keyboard.
3. Follow the procedures from step 4 to step 5 in
4. Replace the battery.
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
"Replacing the base cover".
"Replacing the optical drive".
Replacing the I/O board
22
After
41