6. Lift the speaker at an angle to release the system board.
7. Carefully lift the system board to release the ports from the slots on the palm-rest assembly.
8. Turn the system board over.
a. system board
b. tab
c. speaker
9. Peel the tapes that secure the I/O-board cable and display cable to the system board.
10. Open the latches and disconnect the I/O-board cable and display cable from the system board.
11. Disconnect the power-adapter port cable from the system board.
12. Lift the system board off the palm-rest assembly.
1. system board
3. display cable
2. tape
4. power-adapter port cable
Removing the system board
49