NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1. Slide the hinges under the latches on the display back-cover.
2. Align the screw holes on the display hinges with the screw holes on the display back-cover.
3. Replace the screws that secure the display hinges to the display back-cover.
Post-requisites
1. Replace the
display
panel.
2. Replace the
display
bezel.
3. Replace the
display
assembly.
4. Replace the
system
board.
5. Replace the
heat
sink.
6. Replace the
I/O
board.
7. Replace the
wireless
card.
8. Replace the
memory
module.
9. Follow the procedure from step 4 to step 6 in
10. Follow the procedure from step 3 to step 7 in
11. Follow the procedures from step 4 to step 5 in
12. Replace the keyboard.
13. Replace the battery.
74
Replacing the display hinges
Replacing the display hinges
computer. After working inside your computer, follow the instructions in
"Replacing the hard
drive".
"Replacing the base
cover".
"Replacing the optical
drive".
42
After