Chapter 40: Replacing The Camera; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Connect the camera cable to the camera.
2. Align the camera to the alignment posts on the display back-cover and snap the camera in place.
Post-requisites
1. Replace the display bezel.
2. Replace the display assembly.
3. Replace the system board.
4. Replace the heat sink.
5. Replace the I/O board.
6. Replace the wireless card.
7. Replace the memory module.
8. Follow the procedure from step 4 to step 6 in
9. Follow the procedure from step 3 to step 7 in
10. Follow the procedures from step 4 to step 5 in
11. Replace the keyboard.
12. Replace the battery.
Replacing the camera
computer. After working inside your computer, follow the instructions in
"Replacing the hard drive".
"Replacing the base cover".
"Replacing the optical drive".
Replacing the camera
40
After
71