Chapter 32: Replacing The Power-Adapter Port; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Slide the power-adapter port into the slot on the palm-rest assembly.
2. Replace the screw that secures the power-adapter port to the palm-rest assembly.
3. Route the power-adapter port cable along its routing guides on the palm-rest assembly.
4. Close the display hinge and replace the screw that secures the display hinge to the palm-rest assembly.
Post-requisites
1. Replace the display assembly.
2. Replace the system board.
3. Replace the heat sink.
4. Replace the I\O board.
5. Replace the wireless card.
6. Replace the memory module.
7. Follow the procedure from step 4 to step 6 in
8. Follow the procedure from step 3 to step 7 in
9. Follow the procedures from step 4 to step 5 in
10. Replace the keyboard.
11. Replace the battery.
58 Replacing the power-adapter port
Replacing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Replacing the hard
"Replacing the base
"Replacing the optical
drive".
cover".
drive".
32
After