Chapter 43: Removing The Palm Rest; Prerequisites; Procedure - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
NOTE: These instructions are applicable only for laptops with a non-touch screen display.
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 5 in
5. Follow the procedure from step 1 to step 3 in
6. Remove the memory module.
7. Remove the wireless card.
8. Remove the power-button
9. Remove the speakers.
10. Remove the I/O board.
11. Remove the heat sink.
12. Remove the system board.
13. Remove the touch pad.
14. Remove the power-adapter
15. Remove the display assembly.
Procedure
After performing the prerequisites, we are left with the palm rest.
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
"Removing the hard
board.
port.
Removing the palm rest
drive".
cover".
drive".
43
After
Removing the palm rest 75