NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE:
These instructions are applicable only for laptops with a non-touchscreen display.
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 5 in
5. Follow the procedure from step 1 to step 3 in
6. Remove the
memory
module.
7. Remove the
wireless
card.
8. Remove the
I/O
board.
9. Remove the
heat
sink.
10. Remove the
system
board.
11. Remove the
display
assembly.
12. Remove the
display
bezel.
Procedure
1. Using a plastic scribe, gently pry the camera off the display back-cover.
2. Disconnect the camera cable from the camera.
Removing the camera
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
cover".
"Removing the hard
drive".
drive".
Removing the camera
39
After
69