Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 676

¢ Remote perform function
Function defined as "F3" on the outdoor unit can be performed remotely.
a
b
c
g
h
When selecting the function applied to
multiple outdoor units
a Adapter name selection
Selects the transmission adapter that connects the target unit.
b Function selection
Selects the function to be operated remotely. The window display varies depending on the select-
ed function.
c Outdoor unit selection (for the function applied to multiple outdoor units)
Specifies the outdoor unit to be operated remotely. After the function is performed, the result is
displayed.
d Refrigerant system address selection
Specifies the refrigerant system address which the outdoor unit to be operated remotely belongs
to.
e Outdoor unit selection
Specifies the outdoor unit to be operated remotely.
f Result (for the function applied to one outdoor unit)
After the function is performed, the result is displayed.
g Start button
Performs setting of the value input at the write value field of
Thereafter, the setting contents result is displayed at the read value field of
After setting is completed, subsequent processing can be canceled by clicking the button again.
2-3. Setting by service tool (UTY-ASGXZ1)
a
b
d
f
When selecting the function applied to
one outdoor unit
d for the unit selected in
- (07-76) -
e
g
h
d .
d for check use.
2. Function settings