Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 632

 Entering setting mode
1. While displaying Monitor Mode screen, press and hold the TEMP. "
button at the same time for 2 seconds or longer. Menu 1 screen will be displayed.
Monitor Mode screen
2. While displaying the Menu 1 screen, press and hold the FAN "
longer. Setting mode selection screen will be displayed.
Menu 1 screen
3. Press the TEMP. "
(Menu 2-F2) settings mode.
• F1: Initial settings mode
• F2: Maintenance settings mode
4. While displaying the settings mode selection screen, press START/STOP
item selection screen with item number will be displayed.
Setting mode selection screen
5. While displaying the setting item selection screen with item number, press the TEMP. "
TEMP. " " button to select the item number "13".
Setting item selection screen
1-4. Address setting by remote controller
" or TEMP. " " button to select "F1" (Menu 2-F1) settings mode or F2
Item number
- (07-32) -
" button and FAN "
Menu 1 screen
" button for 2 seconds or
Setting mode selection screen
button. Setting
/
Item number
Setting item selection screen
"
" or
1. System settings