Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 457

¢ Functions
Temperature control
Operation mode
¢ Dimensions
¢ Specifications
Power supply
Power source frequency
Input power
Temperature
Humidity
Dimensions (H × W × D)
Weight
Fuse capacity
 Wiring specifications
Use
Power supply cable
(using remote
control cable)
Transmission cable
Remote controller
cable
External input/
output cable
3-2. Network convertor (UTY-VGGXZ1)
Start/Stop
Ø1-1/8 (28)
3-1/2 (89.5)
For dust proof bushing
Ø7/8 (22) For conduit
10-11/16 (272) Hole pitch
11-5/16 (288)
4-Ø3/16 (5)
For M4 × 20 mm screws
Operating
Packaged
Packaged
Cable size
20 to 16 AWG
60245 IEC 57 or equivalent
2
(0.5 to 1.25 mm )
22 AWG
Non-polar 2 core, twisted pair
2
(0.33 mm )
22 AWG
2
(0.33 mm )
22 AWG
Polar 2 core, twisted pair
2
(0.33 mm )
(Lock the remote controller functions)
Ø1-1/8 (28)
For dust proof bushing
3-1/2 (89.5)
For M4 × 20 mm
screws
9-1/2 (241.6)
V
Hz
W
°F (°C)
°F (°C)
%
in (mm) 2-5/8 × 11-5/16 × 8-5/16 (67 × 288 × 211)
lb (g)
A
Wire type
LEVEL 4 (NEMA)
solid core shielded
Polar 3 core
- (05-119) -
Timer setting
Fan control
Central control
Unit: in (mm)
2-Ø3/16 (5)
2-5/8 (67)
1 Ø AC 208—240
50/60
3.0
32 to 114.8 (0 to 46)
14 to 140 (-10 to 60)
0 to 95 (RH)
No condensation
3 (1,500)
3
Remarks
1 Ø AC 208—240 V 50/60 Hz,
2 wire + ground (Always ground
the unit)
LonWorks compatible cable
Use sheathed PVC cable or
shielded cable in accordance
with the regional cable standard.
Use shielded cable in
accordance with the regional
cable standard.
3. Adaptor/Convertor units