Fujitsu AIRSTAGE J-IIIL Design & Technical Manual page 645

 Entering setting mode
When "Function Setting" on the Maintenance screen is touched, Installer Password Verification
screen is displayed.
Enter the Installer Password, and touch "OK". Function Setting screen is displayed.
Maintenance
 Indoor unit address setting
1. Touch "Address" on the Function Setting screen.
2. Address screen is displayed. Select the address of the indoor unit whose function number is to
be set by touching "
When "OK" is touched, the display returns to the Function Setting screen.
3. Touch "Function No." on the Function Setting screen.
4. Function No. screen is displayed. Set the Function No. "01" by touching "
When "OK" is touched, the display returns to the Function Setting screen.
1-4. Address setting by remote controller
Page 2/ 3
R.C. Address
Test Run
Setting
I.U. Address
Function Setting
Setting
Previous Next
Back
Page Page
Function Setting
Address
Function No.
Setting No.
" or " ".
Address
Function Setting
Address
Function No.
Setting No.
Function No.
Function Setting
Address
Function No.
Setting No.
Back
Function setting mode initial display
[002–01]
[00]
[00]
Back Setting
All
002–01
Cancel OK
[002–01]
[00]
[00]
Back Setting
01
Cancel OK
- (07-45) -
[002–01]
[00]
[00]
Setting
" or " ".
1. System settings